Sartorius Arium Comfort Error Codes


sartorius arium comfort error codes


If you’re experiencing any discomfort with your Sartorius arium, there are a few things you can do to troubleshoot the issue. Here are a few common error codes and what they mean:

– Simplex 1: This means that the machine is not properly connected to the network. Make sure all cables are connected and that the machine is turned on.

– Simplex 2: This means that the machine is not properly configured. Check to make sure that all settings are correct, including the IP address and domain name of the machine.

– Simplex 3: This might mean that one or more of the documents being scanned is corrupted or incomplete. Verify that all scanned files are up-to-date and check for possible errors in those files.

– Duplicate Document: This error code indicates that one or more documents were scanned more than once in a single session. Remove any redundant files from your scan session and try again.

– Out of Memory Error: This could mean that there isn’t enough memory available to complete the scan job, or it could indicate a problem with the scanning software itself. Try restarting both the scanning software and the computer it

What are the Sartorius Arium Comfort Error Codes?

The Sartorius Arium Comfort Error Codes tell you what is wrong with the machine and how to fix it. The codes can be found on the front panel of the machine.

How to Fix Sartorius Arium Comfort Error Codes

Sartorius Arium comfort error codes can be frustrating, but we’ve got you covered. In this blog post, we’ll walk you through the steps to fixing a comfort error code on your Sartorius Arium machine.

If you’re experiencing any of the following issues with your Sartorius Arium machine, don’t hesitate to reach out to our team. We want to make sure your sewing experience is as pleasant as possible!

-The pedal feels too hard or easy to press

-The machine won’t start or has trouble stitching

-The bobbin is empty or the tension isn’t right

What to do if You Encounter a comfort error code on your Sartorius Arium device

If you encounter a comfort error code on your Sartorius Arium device, follow these steps:

1. Reset the device by unplugging it and plugging it back in.
2. Wait 30 seconds and then press the power button to reset the device again.
3. Try restarting the device by pressing and holding down the power button for 10 seconds.
4. If all of these steps fail, please contact Sartorius Technical Support for assistance.


If you’re experiencing problems with your Sartorius arium comfort, there are a few things that you can do to try and fix the issue. First, check to see if there is anything obstructing the air flow into and out of the garment. If this isn’t the case, make sure that all of your buttons are properly fastened and that any zippers or Velcro closures are secure. If those remedies don’t work, it might be time for you to visit an authorized dealer or service center for a replacement or repair. Keep in mind that these steps might not solve every problem, but they should at least help get you started on the right track.